please design the appropriate reliability upon reviewing the ty semiconductor reliability handbook SSM3K7002F high-speed switching applications analog switch applications ? small package ? low on-resistance : r on = 3.3 (max) (@v gs = 4.5 v) : r on = 3.2 (max) (@v gs = 5 v) : r on = 3.0 (max) (@v gs = 10 v) absolute maximum ratings (ta = 25c) characteristics symbol rating unit drain-source voltage v ds 60 v gate-source voltage v gss 20 v dc i d 200 drain current pulse i dp 800 ma drain power dissipation (ta = 25c) p d 200 mw channel temperature t ch 150 c storage temperature range t stg ? 55 to 150 c note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage a nd the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/vol tage, etc.) are within the absolute maximum ratings. (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). electrical characteristics (ta = 25c) characteristics symbol test condition min typ max unit gate leakage current i gss v gs = 20 v, v ds = 0 ? ? 10 a drain-source breakdown voltage v (br) dss i d = 0.1 ma, v gs = 0 60 ? ? v drain cutoff current i dss v ds = 60 v, v gs = 0 ? ? 1 a gate threshold voltage v th v ds = 10 v, i d = 0.25 ma 1.0 ? 2.5 v forward transfer admittance ? y fs ? v ds = 10 v, i d = 200 ma 170 ? ? ms i d = 500 ma, v gs = 10 v ? 2.0 3.0 i d = 100 ma, v gs = 5 v ? 2.1 3.2 drain-source on-resistance r ds (on) i d = 100 ma, v gs = 4.5 v ? 2.2 3.3 input capacitance c iss ? 17 ? pf reverse transfer capacitance c rss ? 1.4 ? pf output capacitance c oss v ds = 25 v, v gs = 0, f = 1 mhz ? 5.8 ? pf turn-on delay time td (on) ? 2.4 4.0 switching time turn-off delay time td (off) v dd = 30 v , i d = 200 ma , v gs = 0 to 10 v ? 26 40 ns unit: mm 1.1-0.1 2.90.2 1.9 +0.1 0.4-0.05 1 23 0.95 0.95 +0.2 0.16-0.06 +0.1 0.3 0~0.1 1.5-0.15 +0.25 2.5-0.3 +0.5 1.gate 2.source 3.drain weight: 0.012 g (typ.) product specification 1 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com
switching time test circuit marking equivalent circuit (top view) precaution v th can be expressed as the voltage between gate and sour ce when the low operating current value is i d = 0.25 ma for this product. for normal switching operation, v gs (on) requires a higher voltage than v th, and v gs (off) requires a lower voltage than v th. (the relationship can be established as follows: v gs (off) < v th < v gs (on). ) take this into consideration when using the device. handling precaution when handling individual devices that are not yet mounted on a circuit board, make sure that the environment is protected against electrostatic discharge. operators should wear antistatic clothing , and containers and other objects that come into direct contact with devices should be made of antistatic materials. nc 1 2 3 12 3 v dd = 30 v duty < = 1% v in : t r , t f < 2 ns (z out = 50 ) common source ta = 25 c in v dd out 50 r l (c) v out (b) v in (a) test circuit 10 v 0 10 s td (on) 90 % 10 % 0 v 10 v 10 % 90 % td (off) t r t f v dd v ds ( on ) SSM3K7002F product specification 2 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com
|
